BRAND: WOOMIUS

WOOMIUS Adjustable IGT Legs (6-Stage)

SKU: WMU-LGSET5083
Prix de vente$76.50 CAD Prix normal$85.00 CAD
Reserve 10% OFF

Material: Stainless Steel
Inbound Option: Standard Ocean
How it ships
Next container from Korea — closes in 6 days · ready early January
Reserve now $76.50 CAD · save $8.50 CAD
  • No duties or import fees — we cover them
  • Manufacturer warranty
  • Free local shipping over CAD $300
  • Free cancellation until it leaves our warehouse

WHY THIS DESIGN

Four things that make them work.

Two stainless legs with each stop hole labeled 500, 550, 600, 660, 750 and 830 mm

Six locked heights.

500 / 550 / 600 / 660 / 750 / 830 mm (19.7–32.7 in). The 750 mm stop puts the tabletop at dining height.

Spring push-button pin seated in a stop hole on the stainless leg

Press, slide, lock.

A spring push-button pin pops into each stop hole. Changing height takes seconds and no tools.

Leveling thumb screw extended from the foot of a stainless leg

Level on rough ground.

A thumb screw at each foot fine-tunes that leg so the table sits flat on uneven sites.

Top of a stainless leg showing the pressed compression step and locating pin

Compression-fit frame ends.

A pressed compression step near the top of each leg tightens the fit in the frame and cuts wobble under load.

HOW IT SETS UP

Three steps to a new height.

Corner of an IGT-standard table frame with the round socket the leg fits into

STEP 1 OF 3

Fit the legs.

Seat each leg in the corner of the IGT-standard frame, the same spot the original legs use.

Stainless leg with its six stop holes labeled from 500 to 830 mm

STEP 2 OF 3

Pick your height.

Press the push-button pin and slide the leg to one of six stops, 500 to 830 mm (19.7–32.7 in). The pin clicks into the hole when it locks.

Leveling thumb screw on the foot of a stainless leg

STEP 3 OF 3

Level and load.

Turn the foot thumb screws until the table sits flat, then load up.

SPECIFICATIONS

All the numbers.

HEIGHTS

6-stage 500–830 mm

19.7–32.7 in

MATERIAL

SUS 304

Stainless steel

WEIGHT

0.48 kg / leg

approx. 1.1 lb

COLLAPSED

500 mm

19.7 in

Specifications

SET CONTENTS
2 adjustable legs
HEIGHT SETTINGS
500 / 550 / 600 / 660 / 750 / 830 mm 19.7 / 21.7 / 23.6 / 26.0 / 29.5 / 32.7 in
ADJUSTMENT
Spring push-button pin
LEVELING
Thumb screw at each foot
MATERIAL
SUS 304 stainless steel
TUBE DIAMETER
approx. 27 mm 1.1 in
WEIGHT
approx. 0.48 kg / leg 1.06 lb
COLLAPSED LENGTH
500 mm 19.7 in
LOAD CAPACITY
20 kg 44 lb
COMPATIBILITY
IGT-standard table frames
WARRANTY
1-year manufacturer warranty

Compatibility

  • IGT-standard modular camp tables Leg seats into the standard IGT-format frame.

Confirm your table uses the IGT-standard frame before ordering.

WHAT'S IN THE BOX

Everything included.

Included

  • Adjustable telescoping leg × 2

Not included

  • Table / tabletop
  • IGT frame

FREQUENTLY ASKED

Questions, answered.

Will these fit my IGT table?

They mount to IGT-standard frames, the format used by IGT-standard modular tables. They are an aftermarket part, not affiliated with any table brand. Check that your table uses the IGT-standard frame before ordering.

How do I change the height?

Press the spring push-button pin, slide the leg to one of six stops (500–830 mm, 19.7–32.7 in), and release. The pin clicks into the hole when it locks. No tools needed.

Should I get the 5-stage or the 6-stage set?

Go by how high you want the tabletop. The 5-stage set runs 400–660 mm (15.7–26.0 in), which suits floor-sitting and low camp chairs. The 6-stage set runs 500–830 mm (19.7–32.7 in) and adds a 750 mm dining height and an 830 mm prep height. Both fit IGT-standard frames the same way.

Can I level them on uneven ground?

Yes. Each foot has a thumb screw that fine-tunes that leg's height, so the table sits flat on slopes or rough campsites.

What are they made of?

SUS 304 stainless steel, which resists rust. Each leg weighs about 0.48 kg (1.1 lb), and the tube is about 27 mm (1.1 in) across.

FROM THE CURATOR

Why we carry it.

BIGTENT ·Coquitlam, BC

We carry both WOOMIUS sets because they solve opposite problems. The 5-stage set brings an IGT table down low. This 6-stage set lifts it up, from 500 mm to a 750 mm dining height and an 830 mm prep height. Same push-button pins and leveling feet, all in SUS 304 stainless.

Kevin G.·Founder · BigTent Outdoors

SHIPPING

Shipping & timing.

Four ways to get it.

Express shipping

Air freight + ground

Recommended if you have a specific trip coming up and need it faster. Cost is calculated by package weight.

1-2 weeks

Standard shipping

Ocean freight + ground

Lower cost. Best when you're not in a rush.

5-8 weeks

Local pickup

BigTent Showroom, Coquitlam, BC

Pick up your order in person at BigTent Showroom, Coquitlam, BC — no shipping fee. In-stock orders are ready quickly; if an item is still inbound, we hold it for pickup and notify you as soon as the next shipment is received.

Within 2 business days when in stock

Local shipping

Ground

Ships from our BC warehouse, Canada — already in North America, so there's no overseas leg and no import wait. Orders within North America arrive with no added duties or customs fees. For destinations outside North America, the recipient is responsible for any duties or customs charges on arrival.

3–7 business days