15-minute pitch.
Press the AIRON button. The integrated pump fills to 8 PSI and stops on its own — no foot pump, no compressor cord.
BRAND:
Kazmi
Kazmi AON Albion Air Tent
SHIPS FROM KOREA · Cut-off today
Reserve today to make our June 30 vessel
Ready for pickup / ship-out from late July
Korea-direct · duty-free · full manufacturer warranty
Reserve today to make our June 30 vessel
Ready for pickup / ship-out from late July
Korea-direct · duty-free · full manufacturer warranty
Compatible add-ons curated to pair withKazmi AON Albion Air Tent.
Be sure to select the right options.
Kazmi AON Albion Air Tent
Sale price$1,759.00 CAD
SHIPS FROM KOREA · Cut-off today
Reserve today to make our June 30 vessel
Ready for pickup / ship-out from late July
Korea-direct · duty-free · full manufacturer warranty
Reserve today to make our June 30 vessel
Ready for pickup / ship-out from late July
Korea-direct · duty-free · full manufacturer warranty
THE ALBION
Pole-tent stability. Air-beam speed.
KZM's AON line, engineered in Korea
Family-size air tents have a tradeoff. Air-beams pitch fast, but they sway in wind and depend on a separate inflator. Pole tents stand firm, but four people and forty minutes can disappear before the rainfly goes on.
The Albion takes the air-beam path and braces it. A one-piece TPU air channel inflates from a single port — air distributes through the connected system without per-tube pumping. A pair of aluminum side ridge poles, Ø 14.5 mm each, braces the structure for self-standing in moderate wind. A pump is built into the tent itself — press the button twice and a pressure sensor stops the motor at 8 PSI. Fifteen minutes from bag to bedded down, give or take.
At 30 kilograms across two carry bags, the Albion lands roughly 57 percent lighter than a typical 4-5 person cotton-blend tent of similar volume. The body fabric holds a 3,000 mm hydrostatic head; the roof fly is rated 5,000 mm with a blackout coating that holds rain and morning sun in equal measure. The 360 × 230 cm inner tent fits two double mats and one twin mat without overlap. A full-mesh window cycles air without inviting insects. YKK zippers throughout.
Sleeping pads, inner rug mats, a Smog TPU front panel, and an external auxiliary pump all attach to the same valve and zipper standard.
WHAT THE ALBION DOES
Four reasons the AON line exists.
Hybrid frame.
TPU air tubes for fast setup. Aluminum side ridge poles for self-standing stability — even when the wind picks up.
Room for five.
360 × 230 cm inner sleeping area. Two double mats and one twin mat fit without overlap. ZEROLUX blackout fabric keeps mornings dim.
Two bags, 30 kg total.
Roughly 40 kg lighter than typical cotton-blend tents of the same footprint. Main body bag 18.5 kg; parts bag 11.5 kg.
THE FIFTEEN-MINUTE PITCH
From bag to bedded down.
STEP 1 OF 11
Stake the corners.
Lay the tent flat, line up the door direction, and drive the four corner pegs. The body footprint is 6 m × 4 m.
STEP 2 OF 11
Open the side-door zipper.
Unzip the side door before you begin.
STEP 3 OF 11
Check the Safe-Lock valves.
Before inflating, confirm the Safe-Lock air valves on both sides of the central air-beam are shut.
STEP 4 OF 11
Raise the lock buttons.
Inflation only works with the lock buttons in the up position — set them before setup.
STEP 5 OF 11
Attach the pump nozzle.
Fit a correctly sized nozzle to the center port on the left or right side, whichever you prefer.
STEP 6 OF 11
Inflate to 8 PSI.
Target pressure is 8 PSI (0.55 bar); adjust for the season. Keep the air tubes from kinking — a bent tube can damage the beam or strain a zipper.
STEP 7 OF 11
Stand the beams, then top off.
At about 70–80% inflation, raise the air-beams from inside, then top off to full pressure. Disconnect the pump when done.
STEP 8 OF 11
Dress the beams, close the Velcro.
Tidy the front and rear central air-beams and fabric, then fasten the Velcro.
STEP 9 OF 11
Set the side ridge poles.
Slide each side ridge pole fully into its sleeve, then seat the tips into the front and rear webbing eyelets to lock them.
STEP 10 OF 11
Peg out the end skins.
Pull the skin taut at both front and rear ends and peg it down through the loop webbing.
STEP 11 OF 11
Pitch complete.
That's the full pitch — typically 10 to 15 minutes.
WHY THIS, NOT THAT
Air tent vs pole tent vs hybrid.
Where the Albion fits among 4-5 person family tents.
Typical air tent
Fast to pitch, but stability and pump dependencies remain.
- FRAME Air-beam, 10-20 min pitch
- PUMP Often requires separate electric pump
- MATERIAL PVC tubes — heavier, less cold-flexible
- WIND Sways in moderate wind
- WEIGHT 40-50 kg / 88-110 lb (typical 4-5 person)
Pole tent (TC fabric)
Stable and warm, but slow setup and heavy pack.
- FRAME Pole-frame, 30-45 min pitch
- PUMP No pump required
- MATERIAL TC cotton blend — warm, breathable, heavy
- WIND Stands firm in wind
- WEIGHT 60-80 kg / 132-176 lb (typical 4-5 person)
Kazmi AON Albion (this)
Air-tent speed, ridge-pole stability, TPU efficiency.
- FRAME Hybrid — TPU air-beam + aluminum ridge poles, 10-15 min pitch with built-in pump
- PUMP Built-in AIRON pump with pressure sensor
- MATERIAL TPU tubes — lighter, cold-flexible, burst-resistant
- WIND Self-standing in moderate wind
- WEIGHT 30 kg / 66 lb across two bags
FULL SPECS
All the numbers.
All accessories share the AON valve and zipper standard.
CAPACITY
4-5 people
PITCHED
600 × 400 × 230 cm
19.7 × 13.1 × 7.5 ft
TOTAL WEIGHT
30 kg
66.1 lb (across 2 bags)
TARGET PSI
8 PSI
0.55 bar / 55 kPa
Specifications
- BRAND
- Kazmi (KZM OUTDOOR)
- SERIES
- AON
- COLOR
- Charcoal
- INNER TENT
- 360 × 230 cm / 11.8 × 7.5 ft
- PACKED SIZE (MAIN BAG)
- 88 × 38 × 38 cm / 34.6 × 15.0 × 15.0 in
- WEIGHT — MAIN BAG
- 18.5 kg / 40.8 lb
- WEIGHT — PARTS BAG
- 11.5 kg / 25.4 lb
- BODY FABRIC
- 100% polyester taffeta 75D ripstop, silicone + PU + DWR + UV coating
- BODY HYDROSTATIC HEAD
- 3,000 mm
- ROOF FLY HYDROSTATIC HEAD
- 5,000 mm (with blackout coating)
- INNER FLOOR HYDROSTATIC HEAD
- 2,000 mm
- GROUND SHEET HYDROSTATIC HEAD
- 1,500 mm
- AIR TUBE
- TPU thermoplastic polyurethane, Ø 10 cm
- RIDGE POLES
- Aluminum, Ø 14.5 mm (2 pieces)
- ZIPPERS
- YKK® throughout
- WINDOWS
- Full mesh + double-open front zipper
- BUILT-IN AIRON PUMP
- 2,500 mAh Li-ion battery, USB-C, 3.5 hr charge, KC + CE/UKCA/FCC/Intertek GS certified
- PRESSURE SENSOR
- Auto-stop at user-set target
- HAND PUMP
- Included as backup (with 4 nozzles)
- PEGS
- 24 × steel
- GUY ROPES
- 140 cm × 6 + 170 cm × 6 + 300 cm × 4 (16 total, pre-attached on tent body)
Compatibility
- Kazmi AON Albion Smog TPU Front Panel Front panel only. Sold separately. Adds tinted-TPU view when all doors are closed.
- Kazmi AON Albion Air Inner Rug Mat Fits the 360 × 230 cm inner tent. Sold separately.
- Kazmi AON Cordless Electric Air Pump Optional. The Albion already has a built-in pump; K25T3M01 is a backup or for other AON inflatables.
- Kazmi AON T-250 Air TC Liner Designed for the T-250 line. Confirm fit before purchase if pairing with Albion.
Built-in AIRON pump runs on its own battery. External pump (K25T3M01) is an optional backup for groups using multiple inflatables or when the built-in battery runs out.
For the spec-minded buyer.
Things to know before buying.
A 4-5 person tent at 600 × 400 cm footprint with 230 cm ceiling. Two double mats and one twin mat fit the inner tent without overlap.
Built-in AIRON pump with pressure sensor brings the air-beam to 8 PSI in two to three minutes. Ridge poles and guy ropes add roughly ten minutes more.
Two aluminum side ridge poles brace the tunnel structure. Pre-attached guy ropes drop into place on both flanks for additional anchoring.
Total weight is 30 kg across two carry bags. The Albion is built for car camping or vehicle-staged base camps — not for trail use.
Target pressure is 8 PSI. Inflating past this damages the air-beam — the AIRON pump auto-stops to prevent this. Do not override with a higher-pressure pump.
Ships ground freight in two cartons. The built-in lithium battery and bulk weight rule out air shipping. Expect 5-10 business days within North America.
WHAT'S IN THE BOX
Ships in two boxes.
Heads up: this product arrives in two cartons due to size and weight.
Included
- Box 1 — Albion air tent body with integrated AIRON pump and air-beam frame (18.5 kg) × 1
- Box 1 — Main tent storage bag (88 × 38 × 38 cm) × 1
- Box 2 — ZEROLUX inner tent × 1
- Box 2 — Roof fly with TPU window × 1
- Box 2 — Polyester oxford 150D ground sheet × 1
- Box 2 — Aluminum side ridge poles (Ø 14.5 mm) × 2
- Box 2 — Steel pegs × 24
- Box 2 — Guy ropes 140 cm × 6, 170 cm × 6, 300 cm × 4
- Box 2 — Hand pump with hose and 4 nozzles (backup for built-in AIRON pump)
- Box 2 — Built-in pump battery (2,500 mAh lithium-ion, USB-C) × 1
- Box 2 — Parts storage bag × 1
Not included
- USB-C wall adapter (use any 5 V / 2 A USB-C charger — fast chargers at 9 V or 12 V will damage the battery)
- Front uprighting pole (for extended-awning configuration)
- Smog TPU front panel — Kazmi K251T3T27, sold separately
- Inner Rug Mat — Kazmi K251T3T37, sold separately
FREQUENTLY ASKED
Questions, answered.
How long does it take to set up?
Roughly 10 to 15 minutes total. The integrated AIRON pump brings the air-beam to 8 PSI in two to three minutes — the rest is staking corners, slotting ridge poles, and setting guy lines.
Why does it ship in two boxes?
Because of size and weight. The main tent body (18.5 kg) ships in one carton; the inner tent, roof, ground sheet, poles, pegs, ropes, hand pump, and battery ship in a second carton. Check both arrive together before pitching.
What if the built-in pump battery dies on a trip?
A backup hand pump with four nozzles ships in the box. It is slower than the AIRON pump but gets the tent to pressure without electricity. The battery itself recharges over USB-C in about 3.5 hours.
Do I need a separate Kazmi AON pump?
No. The Albion has a pump built into the tent. The Kazmi AON Cordless Electric Air Pump (K25T3M01) is an optional secondary unit — useful if you also inflate sleeping pads, SUPs, or other gear, or want a faster swap on group trips.
How weatherproof is it?
The body fabric is rated 3,000 mm hydrostatic head and the roof fly 5,000 mm — well above the 1,500 mm threshold for steady rain. The inner floor is 2,000 mm; the ground sheet adds another 1,500 mm. YKK zippers and silicone-coated taffeta handle wet conditions across multiple seasons.
Can it stand up to wind?
Two aluminum side ridge poles brace the tunnel structure for self-standing in moderate wind. Pre-attached guy ropes on both flanks add anchoring. For sustained high winds, stake all 16 guy lines and orient the narrow end into the wind.
What charger do I use for the built-in pump battery?
A standard 5 V USB-C charger at 10 W or less. Fast chargers rated 9 V or 12 V will damage the battery. The cable is included; the wall adapter is not.
Can I take the battery on a plane?
The 2,500 mAh built-in battery is well under the 100 Wh IATA carry-on threshold. Always confirm with your carrier — the battery must travel in your carry-on, not checked. Note that the tent itself is too large for air travel and ships ground only.
What is the warranty?
BigTent offers a 1-year limited warranty against defects in materials or workmanship. Damage from over-pressurization, fast chargers, or improper storage of the battery is not covered.
FROM THE CURATOR
Why we anchored the AON line with this.
"Most air tents force a choice — easy pitch or wind stability. The Albion takes the air-beam route and then adds aluminum side ridge poles to hold it firm. A built-in pump means we stopped recommending separate inflators as a default purchase. At 30 kg packed against typical 60-80 kg cotton-blend tents of the same volume, it earned the anchor spot in KZM's AON line — and ours."
Kevin G.·Founder · BigTent Outdoors
BUILD THE SYSTEM
Albion with its AON-line accessories.
SHIPPING
Shipping & timing.
Four ways to get it.
Express shipping
Air freight + ground
Recommended if you have a specific trip coming up and need it faster. Cost is calculated by package weight.
2-3 weeks
Standard shipping
Ocean freight + ground
Lower cost. Best when you're not in a rush. All duties included, no surprises at delivery.
5-8 weeks
Local pickup
BigTent Showroom, Coquitlam, BC
Pick up your order in person at BigTent Showroom, Coquitlam, BC — no shipping fee. In-stock orders are ready quickly; if an item is still inbound, we hold it for pickup and notify you as soon as the next shipment is received.
Within 2 business days when in stock
Local shipping
Ground
Ships from our BC warehouse, Canada — already in North America, so there's no overseas leg and no import wait. Orders within North America arrive with no added duties or customs fees. For destinations outside North America, the recipient is responsible for any duties or customs charges on arrival.
3–7 business days